好多水好爽小荡货h

 Service hotline National Service Hotline:

195-2099-7653

Yongren through drive in shelf_ The secret of installation of through shelf

What should be paid attention to in the design and installation of through shelf

Through type shelf also known as corridor type shelf, drive in type shelf. This system has dense shelf arrangement and high space utilization rate, which is almost twice as much as that of pallet rack. However, the goods must be of small variety and large batch type, and the goods should be first in and then out. First of all, it is necessary to carry out containerization work to determine the specification, load capacity and stacking height of pallets. According to the effective height of the lower edge of the roof truss, the height of the shelf is determined. The total depth of the shelf in the area close to the wall should be controlled within 6 pallet depths, and the total depth of the rack area that can be accessed from both sides in the middle area should be controlled within 12 pallet depths, so as to improve the efficiency and reliability of forklift access (in this kind of rack system, the forklift is a continuous "high lift and hit" operation mode, and the forklift is easy to shake and hit the shelf).

The stability of this kind of storage system is weak, and the shelf should not be too high. Generally, it should be controlled within 10 mm. In order to strengthen the stability of the whole shelf system, in addition to the specification and selection, it is necessary to add a fastening device. The single pallet cargo should not be too large and heavy. Generally, the weight should be controlled within 1500 kg, and the pallet span should not be greater than 1.5 m. Forklift truck is usually equipped with forward moving battery forklift or counterweight battery forklift. It is mainly used in dairy, beverage and other food industries, and it is more common in cold storage.

Siyecheng shelf solution

Drive in racking

Through type shelf also known as corridor type shelf, drive in type shelf. The system has the advantages of dense shelf arrangement, high space utilization rate, almost twice as much as the pallet rack, but the goods must be of small variety and large batch type, and the goods should be first in and then out. First of all, it is necessary to carry out containerization work to determine the specification, load capacity and stacking height of pallets. According to the effective height of the lower edge of the roof truss, the height of the shelf is determined. The total depth of the shelf in the area close to the wall should be controlled within 6 pallet depths, and the total depth of the rack area that can be accessed from both sides in the middle area should be controlled within 12 pallet depths, so as to improve the efficiency and reliability of forklift access (in this kind of rack system, the forklift is a continuous "high lift and hit" operation mode, and the forklift is easy to shake and hit the shelf). The stability of this kind of storage system is weak, and the shelf should not be too high. Generally, it should be controlled within 10 m. in order to strengthen the stability of the whole shelf system, in addition to the specification selection, it is necessary to add a fastening device. The single pallet cargo should not be too large and heavy. The weight is usually controlled within 1500kg, and the pallet span should not be greater than 1.5m. Generally, the forklift truck is a forward moving battery forklift or a counterweight battery forklift. It is mainly used in dairy, beverage and other food industries, and it is more common in cold storage.

In short: the same space space utilization rate, high cost of the bottom of the shelf

The disadvantage is: the goods are first in and then out

Usage of through shelf

The crown of Deng Chen that the friend company uses before runs through shelf good, can go to see his home

What is through warehouse

Dengchen's crown shelf is also doing through type shelf. You can ask

Are drive in shelves and through shelves the same?

It's not the same, but the light is very similar in shape. Through type shelf can take goods from the middle. Only in order to pick up should be the gravity rack.

Usage of through shelf

Although we all know how to use the drive in shelf can help enterprises to improve their economic benefits, it is not enough to pay attention to this point only. What we need to pay attention to is how to better use the drive in shelf and maximize the economic benefits.

The better use of through shelf needs to pay attention to, in the design of a new warehouse or transformation of an existing warehouse, then the application of the system characteristics of the warehouse should be reviewed and studied. For example, the drive in shelf can achieve the maximum storage capacity in the smallest space, then this economic logistics scheme can be selected.

In the use of through type shelves, loading and unloading from one side can effectively improve the time efficiency.

Through type shelf is a kind of continuous whole shelf which is not divided by channel. On the supporting guide rail (corbel), pallets are stored in depth direction, one after another, which makes high-density storage possible. The drive in shelf is suitable for the storage of goods with small variety and large quantity. It is often used to store and enlarge the same type of goods. It has high space utilization, and is suitable for food industry, chemical industry, clothing industry, cold storage and other occasions with high storage space cost. The storage cost per unit site is relatively low.

The through type shelf can be divided into one-way and two-way arrangement according to the direction of taking goods. The total depth of one-way (wall area) shelf is best controlled within 6 pallet depths, and the total depth of two-way (middle area can pick up goods on both sides) shelf area should be controlled within 12 pallet depths, In order to improve the efficiency and reliability of the forklift (in this kind of rack system, the forklift is a continuous "high lift" operation mode, and the forklift is easy to shake and hit the rack, so it is important to consider the stability fully or not). The stability of this kind of storage system is weak, and the shelf should not be too high. Generally, it should be controlled within 10 meters. In order to strengthen the stability of the whole shelf system, in addition to the specification and selection, it is necessary to add a fastening device. Single pallet cargo should not be too large and heavy. The weight is usually controlled within 1500kg, and the span of pallet should not be greater than 1.5m. Forklift truck is usually equipped with forward moving battery forklift or counterweight battery forklift. 2005张筱雨魅惑_百度云资源共享分享群组链接_宅男软件猫咪破解版. is a professional and shelf manufacturer in Shanghai. We mainly produce all kinds of warehouse shelves, logistics shelves, supermarket shelves, material shelves, mold shelves, light shelves, heavy shelves, Shanghai shelves, Shanghai warehouse shelves, material shelves, Shanghai mold shelves, etc.

Because the goods stored in the through type rack are dense and the stability is very high, it needs more shelf accessories. Through the connection between the accessories and the shelf column piece, the goods can be stored on the bracket beam safely and intensively, and the space can be utilized to the maximum extent. The accessories of drive in rack include: corbel (the main connecting part between bracket beam and rack column, which is divided into single side and double side), corbel beam (main supporting layer for goods storage), top beam (connecting stabilizer of rack column), top pull (connecting stabilizer of rack column), back pull (connecting stabilizer of rack column), foot guard (front protective part of shelf), and the main parts of rack are as follows Guard rail (rack protection parts when forklift enters the roadway).

What is through warehouse

Through type shelf also known as corridor type shelf, drive in type shelf. This system has dense shelf arrangement and high space utilization rate, which is almost twice as much as that of pallet rack. However, the goods must be of small variety and large batch type, and the goods should be first in and then out. First of all, it is necessary to carry out containerization work to determine the specification, load capacity and stacking height of pallets. The span, depth and layer spacing of the unit shelf are determined, and the height of the shelf is determined according to the effective height of the lower edge of the roof truss. The total depth of the shelf in the area close to the wall should be controlled within 6 pallet depths, and the total depth of the shelf area with access from both sides in the middle area should be controlled within 12 pallet depths, In order to improve the efficiency and reliability of the forklift (in this kind of rack system, the forklift is a continuous "high lift" operation mode, and the forklift is easy to shake and hit the rack, so it is important to consider the stability fully or not). The stability of this kind of storage system is weak, and the shelf should not be too high. Generally, it should be controlled within 10 m. in order to strengthen the stability of the whole shelf system, in addition to larger specifications and selection, it is necessary to add a fastening device. The single pallet cargo should not be too large and heavy. The weight is usually controlled within 1500kg, and the pallet span should not be greater than 1.5m. Forklift truck is usually equipped with forward moving battery forklift or counterweight battery forklift. It is mainly used in dairy, beverage and other food industries, and it is more common in cold storage. The above answers are provided by maobang shelf

2005张筱雨魅惑_百度云资源共享分享群组链接_宅男软件猫咪破解版

What's the difference between corridor shelf and through shelf

Through type shelf is also known as drive in shelf or corridor type shelf. This is a kind of continuous whole block shelf which is not divided by the channel. On the supporting guide rail, pallets are stored in depth direction, one after another, which makes high-density storage possible.

The through shelf has relatively low investment cost, and is suitable for large horizontal size, less varieties, large quantity and pre-determined storage mode. It is often used to store a large number of the same type of goods.

Because of the high storage density and high utilization rate of floor space, the through type shelf is often used in places with high storage space cost, such as cold storage.

Through type rack is suitable for storing large quantities of goods with few varieties. Forklift can directly enter the goods to store goods.

Through type shelf can realize goods first in first out, and the utilization rate of warehouse space is as high as 80%

All the through shelves are made of cold-rolled steel plates, which are treated by acid pickling and phosphating External decoration powder electrostatic spray, strong corrosion resistance, beautiful appearance, reasonable structure, strong bearing capacity, can be disassembled and used repeatedly

Cantilever shelf is suitable for storing long goods, circular goods, plates, pipes and irregular goods. Cantilever is divided into single side and double side.

Cantilever shelf has the characteristics of stable structure, good load capacity and high space utilization rate.

Most of the cantilever rack columns are made of H-shaped steel or cold-rolled steel, the cantilever is made of square tube, cold-rolled steel or H-beam, the cantilever and column are connected by plug-in or bolt connection, the base and column are connected by bolt, and the base is made of cold-rolled steel or H-beam. Loading and unloading of goods is carried out by forklift truck, carrier truck or manual operation.

The height of cantilever rack is usually less than 2.5 meters (up to 6 meters if the goods are stored and unloaded by forklift), the cantilever length is less than 1.5 meters, and the load per arm is usually less than 1000 kg.

Application range of cantilever shelf

Cantilever shelves are mostly used in machinery manufacturing industry, building materials market, supermarkets and so on.

Cantilever shelf with partition board is suitable for warehouse with small space and low height. It is easy to manage and has wide vision. Compared with ordinary shelf shelf shelf, the utilization rate is higher; According to the bearing capacity, it can be divided into light weight type, medium weight type and weight type

Storage rack of leader Weiye

Drive in shelf is also called corridor type shelf or through type shelf. What is the market application of zy06

Through type shelf is also called corridor type shelf or drive in type shelf. Through rack can be used for forklift truck (or unmanned carrier with fork) to drive into the channel to access goods. It is suitable for the storage of goods with few varieties and large quantities. In addition to the storage space close to the passageway, due to the forklift needs to enter the inside of the rack to access the goods, it is generally recommended that the depth of single side pickup should not exceed 7 locations. In order to improve the operation speed of forklift trucks, guide rails can be selected according to the actual needs. Compared with the location type shelves, the utilization rate of through type shelves (drive in shelves) can be increased by more than 30%. Through type shelves (drive in shelves) are widely used in wholesale, cold storage, food and tobacco industries.

Shelf features:

1. On the support rail, pallets are stored in depth direction, one after the other, which makes high-density storage possible.

2. The goods can be put in and out from the same side of the shelf. The balance weight and the forward moving forklift can be easily driven into the middle of the shelf to access the goods without occupying multiple channels.

3. This kind of rack is suitable for storing large quantities and few varieties of goods. The bracket and bracket shelf of through type shelf (drive in rack) adopt integral stamping / rolling technology, which has strong bearing capacity and beautiful appearance.

The total depth of the shelves near the wall should be controlled within 5 pallet depths. The total depth of the shelves in the middle area which can be accessed from both sides should be controlled within 10 pallet depths, so as to improve the efficiency and reliability of forklift access.

2005张筱雨魅惑_百度云资源共享分享群组链接_宅男软件猫咪破解版

http://6.jwvision.cnhttp://3.jwvision.cnhttp://7.jwvision.cnhttp://6.jwvision.cnhttp://2.jwvision.cnhttp://4.jwvision.cnhttp://2.jwvision.cnhttp://4.jwvision.cnhttp://3.jwvision.cnhttp://8.jwvision.cn